previous | up | next
|
Annovi Reverberi RMW Economy Axial Radial Pumps 3400RPM D Version 7/8" w/Vertical Gas Engine Flange
 E-mail this product to a friend
AR pumps are a combination of exceptional degree of technology and innovation, quality and reliability worthy of a leading brand on the market. The wide range includes many models which vary in terms of pressure, deliver, power and technical characteristics, to satisfy widely different market demands.
• Manifold:
- Forged Brass: Strength and no porosity - long life. Higher hydrostatic pressures - safety.
- Unloader: Integral trap pressure, fixed chemical injector. Simple repair using a cartridge replacement kit.
- Bolts: Three bolts, 6mm grade 8.8.
• Valves:
- Ultra Form Cages: Durable, strong, and long life.
- Poppets and Spring: 303 series stainless steel.
- Valve Seat: Brass with an external sealing o-ring on both inlet and discharge valves.
- Valve Caps: Machined brass for greater strength.
• Packing and Plungers: Dual seal system.
- High Pressure Packing and Low-Pressure Seals: "U" cup double lip Buna-N for a good positive seat.
- Support and Guides: Special anti-wear plastic, 1-piece construction to assure proper plunger alignment, maximize packing and seal life and prevent plunger wear and damage.
- Plungers: Solid hardened stainless steel, strong and durable.
• Bearings: Oversized ball bearing stabilizes the crankshaft and one needle style thrust bearing absorbs the plunger load and assures long radial plate life.
• Crankcase: Precision die-cast, with cooling fins for maximum heat dissipation. The housing retains the crankshaft bearing, oil seal and rear wobble plate bearing support washer.
• Crankshaft/Wobble Plate: Precision die-cat to assure proper stroke, duration and alignment.
• Oil Seals and O-rings: All are constructed of Buna-N rubber. The oil seals have stainless steel garder springs to assure constant tension on the sealing surface.
• Oil Capacity: 2.3 oz.
• Ports:
- Inlet Port: Is supplied with a standard brass garden hose connection with inlet strainer.
• Dyno Proven: All pumps are dyno tested to assure the theoretical design meets the actual design.
• Valve Design: Each pump series has a valve design that optimizes its highest efficiency.
• Wet End Repair: Very simple no special tools required.
• Design: Using advanced fluid handling design programs. Overall pump efficiency is increased.
Free Freight On Orders Over $149! |
|
|
| 2 GPM @ 2400 PSI RMW2G24 | | SKU: | RMW2G24 | | Price: | $166.55 | |
|
| 2 GPM @ 2400 PSI RMW2G24B | | SKU: | RMW2G24B | | Price: | $157.55 | |
|
| 2 GPM @ 2500 PSI RMW2G25D | | SKU: | RMW2G25D | | Price: | $177.64 | |
|
| 2.2 GPM @ 2000 PSI RMW2.2G20D | | SKU: | RMW2.2G20D | | Price: | $136.09 | |
|
| 2.2 GPM @ 2400 PSI RMW2.2G24-EZ | | SKU: | RMW2.2G24-EZ | | Price: | $136.09 | |
|
| 2.2 GPM @ 2400 PSI RMW2.2G24-EZ-SX | | SKU: | RMW2.2G24-EZ-SX | | Price: | $136.09 | |
|
| 2.2 GPM @ 2400 PSI RMW2.2G24-ST | | SKU: | RMW2.2G24-ST | | Price: | $136.09 | |
|
| 2.5 GPM @ 2500 PSI RMW2.5G25D | | SKU: | RMW2.5G25D | | Price: | $177.64 | |
|
| 2.5 GPM @ 2600 PSI RMW2.5G26D-F7 | | SKU: | RMW2.5G26D-F7 | | Price: | $183.18 | |
|
| 2.5 GPM @ 2800 PSI RMW2.5G28-EZ-SX | | SKU: | RMW2.5G28-EZ-SX | | Price: | $174.92 | |
|
| 2.2 GPM @ 2600 PSI SRMW2.2G26-EZ | | SKU: | SRMW2.2G26-EZ | | Price: | $153.08 | |
|
| 2.2 GPM @ 2600 PSI SRMW2.2G26-EZ-SX | | SKU: | SRMW2.2G26-EZ-SX | | Price: | $153.08 | |
|
